Striker Rocket

Striker is similar in styling to some of the most advanced and devastating weapons on the modern battlefield. It'll sure to be a stunner at any launch!

To use 29mm motors in a 38mm mount, purchase the optional HAMR 38mm retainer  and HAMR 38 to 29mm adapter.

• Pre-slotted phenolic airframe
• 36" Rip-Stop Nylon parachute
• Plastic nosecone
• 38mm motor mount
• Kevlar tether with sewn loop
• G-10 fins
• Rail guides for 10/10 launch rails
• Decal

PML General Kit Instructions

Striker Nose Cone Build Instructions

Striker Rocksim

Specification:

Diameter: 3.9" | Height: 36.5" | MMT: 38mm
Parachute: 36" | Payload: None
Fin Array: 4 | Fin Thickness: 0.063"

The STRIKER is a mean-looking kit for Level 1 and 2 flights. This rocket stands 36.5" tall, is 3.9" in diameter and has a 4 fin design. This rocket comes standard with a 38mm motor mount and can fly on H thru J motors. At ~52 oz., the 36" parachute is sized right for the stock kit to make a safe landing under most field conditions. This kit comes standard with rail guides for use with 10/10 launch rails. 

It is prudent to sim your kit/motor combination using the actual weight of your finished model to determine max velocity, altitude, ejection delay, etc. This will allow you to make an informed decision when selecting a suitable motor for your rocket. Please consult with a NAR or Tripoli certified member to ensure your flights are fun and safe.