Hello folks! We hope you all are staying safe and busy during these crazy times. We have been keeping busy improving products and working on new innovations. Here’s some highlights of 2020 thus far.
NEW ROCKET KITS
5.5″ ULTIMATE BUZZ
$160.00 – $265.00
5.5″ version of the archived Yank Enterprises Mystic Buzz. This split fin rocket should make some noise in the sky with a stock 75mm motor mount. Easily adaptable down to 54mm or even 38mm with additional motor mount adaptors. Construction details include a fin to ring system that assures alignment is a breeze and sturdier than ever. You can build the motor fin can out side the airframe, with some modification to the airframe, and slide it up the booster. Epoxy in, apply small external fillets and done! We offer this kit with no recovery, full recovery OR full dual deployment. Something for everyone we hope. 34″ booster, 30″ payload and 21.5″ long cone. New 5/8″ tubular nylon Y Harness included in recovery option selections.
2.2″ ZEUS
$69.75 – $74.75
A great flyer for E-G motor range. The 2.2″ Zeus weighs in at 17oz and comes with a 29mm motor mount standard. Triple slotted tubes so every fin has a tab! 24″ Parachute, tubular nylon shock cord with sewn loops, kevlar mount, and fire blanket are all included as well as a decal set! Choose from a 29mm motor mount or the 38mm mount to be married to the 3″ Terrier Booster for 2 stage flights!
2.26″ AEROBEE HI
$69.75
A variation of the Aerobee sounding rocket program, the HI is a scaled down 2.2″ version with a 29mm motor mount. Made to fly on black powder or composite propellant 29mm motors to altitudes from 250-3,000′ +! Great for D-H motors!
LASERLOC 163
$55.35
Celebrating 35 years of LOC – we bring back an old favorite! The LaserLOC series was one of the first production minimum diameter kits available to the public. Keeping the tradition going we have a few modern day tweaks that will put your skills to the test. A gentle laser etch around the slots allow for easier glassine removal. Multi-slot airframe allow the fins to click into the booster. Precut 4oz fiberglass cloth can be easily epoxied from fin-airframe-fin. This reinforcement will give your LaserLOC the strength for today’s higher impulse motors. Fiberglass should be applied with a long cure epoxy for best results. If you have never glassed anything before, here’s your chance! The booster is a zipperless design. 1/4″ Launch lugs included. Fly away rail guides are another alternative.
Strong enough for supersonic flights. Light enough on your wallet and to fly an E motor!!!
LASERLOC 223
$110.00
Celebrating 35 years of LOC – we bring back an old favorite! The LaserLOC series was one of the first production minimum diameter MID-HIGH POWER kits available to the public. Keeping the tradition going we have a few modern day tweaks that will put your skills to the test. A gentle laser etch around the slots allow for easier glassine removal. Multi-slot airframe allow the fins to click into the booster. Precut 4oz fiberglass cloth can be easily epoxied from fin-airframe-fin. This reinforcement will give your LaserLOC the strength for today’s higher impulse motors. Fiberglass should be applied with a long cure epoxy for best results. If you have never glassed anything before, here’s your chance! 1/4″ Launch lugs included. Fly away rail guides are another alternative. Full dual deployment ready with electronics bay and recovery included. Go ahead, drag race your fiberglass friends!!!
Strong enough for supersonic flights. Light enough on your wallet and to fly an F motor!!!
LASERLOC 313
$158.00
Back from the depths of LOC/Precision, the LaserLoc has been breaking the sound barrier for 35 years. With some added upgrades including multi-slot booster and precision cut fiberglass fin can reinforcements! This kit is full dual deploy ready to fly higher than ever!
REFRESH
