V2 4"
V2 4"
V2 4"
V2 4"
V2 4"
V2 4"

V2 4"

PK-57ND

Regular price $123.53
/

Only -77 items in stock!

The 4" LOC V2 Rocket Kit is one of the ADVANCED SERIES of kits, which include factory pre-slotted airframe and through-the-wall fin construction, The 3.9 V2 is our sport scale version of the infamous WWII German V2 rocket. This boat tail kit comes standard with a 38mm motor mount but flies great on F50 and G motors using an optional MMA-2 adapter. The 3.9 V2 is a great performer on a variety of motor packages through Level 1 - For Level 2 motors and large Level 1 motors change the launch lugs to rail guides to eliminate rod whip due to its short height and wide motor mount location. Nose weight will be required.

PK-57V2-Instructions

DESCRIPTION

Complexity: Intermediate-Advanced
Diameter: 4″
Height: 33.75
Weight: 41.5oz
Motor Mount: 38mm
Parachute Size: 28″ Ripstop Nylon
Shock Cord Type: NW-12 12' 3/8″ Nylon with sewn loops
Shock Cord Mount: SCM-3 Eyebolt
Fin Thickness: 1/8″
Ring Thickness: 1/4″
Instructions: Yes

 

Customer Reviews

Based on 6 reviews
50%
(3)
17%
(1)
33%
(2)
0%
(0)
0%
(0)
T
Trevor G.
Good but not Great

Really great looking kit, but there are a few drawbacks. The boat tail is mildly short of terribly slotted. Only one fin fit into the boat tail, and it was a too-loose fit. The others wouldn't even fit. No problem, I carved it out with an X-acto knife. Then when I put them all in, I realized they weren't even 90 degrees apart. No matter, you can't tell unless you look top down. However, the biggest problem was the fins weren't the right length for the boat tail. The aft tab that is supposed to touch the end of the boat tail had 1/4 inch of clearance. I didn't realize they were supposed to touch because there was so much space. Everything else about the kit is stellar, and it looks really good.

S
Scott Nokes
Awesome

The kit is a very quality kit and nice components as with any other LOC kit.
Jay at LOC is so so wonderful. I've needed advice in places and he's been there everytime and very helpful. I only build LOC kits and will continue too. Thank you for being a wonderful company. Thanks for all you have done and do

R
Richard Drown
Poor slotting on boat tail

I am painting my V2 now and wanted to add my $.02 worth. As I was installing the TTW fins in the boat tail, I realized that the slots were WAY off in spacing. The four fins are supposed to be 90 degrees apart. The slots on this kit were cut at 84, 90, 93, and 94 degrees. I had to recut one slot by another ⅜ inch to the side to get it close. The other one was ¼ inch. I already had one fin epoxied in when I discovered the error or I would have returned the boat tail for a different one. I guess that is why you should dry fit and check for square before beginning.
The rest of the kit is high quality and will still recommend LOC to everyone as a good kit.

J
John Hagen-Brenner
LOC 4 Inch V-2. Marginal kit, semi scale.

The first thing I noticed is that the root edge of the LASER cut fins do not come close to mating with the boat tail contour, with gaps up to 3/32" in places. The root edge profile is cut in straight lines. I'll have to transfer the boat tail curve to the fins and trim them, which means the fin tab, where it mates to the MMT will probably have to be adjusted. I guess that's what makes it an advanced kit. I've got the skills, but didn't anticipate the extra noodling. The instructions are very brief and sparse and describe installing launch lugs instead of the supplied rail buttons, for which there are no instructions and I have no experience with. True scale is marginal, but true scale is not claimed. To get the length proportional to the BT diameter, the main airframe BT would be shortened by about 2.65 inches. I bought a different nose cone that's got a better point on it as the one supplied looked too blunt for my liking. I think it'll be a nice rocket when I get it finished.

M
Mark Payne
LOC V-2 s

Wonderful kits. Need help making it truly scale. Motor options ?

Why choose us?

ROCKETRY LEADER SINCE 1985

LOC Precision provides quality rocket kits and components for every skill level. Your one stop shop for anything rocketry.

TESTIMONIALS

★★★★★

Most of my High Power and Mid Power fleet is LOC. I certified all three levels using LOC kits. The quality of the kits & customer service is phenomenal. I would recommend them to everyone.

Peter Waithe
Millbury, MA
★★★★★

I have 16 LOC models love building them and flying them! Jason has turn the company around and made the hobby a lot more fun and really good people. I sincerely thank you LOC

Dennis Jurus
Lancaster, NY

Recently viewed

Customer Reviews

Based on 6 reviews
50%
(3)
17%
(1)
33%
(2)
0%
(0)
0%
(0)
T
Trevor G.
Good but not Great

Really great looking kit, but there are a few drawbacks. The boat tail is mildly short of terribly slotted. Only one fin fit into the boat tail, and it was a too-loose fit. The others wouldn't even fit. No problem, I carved it out with an X-acto knife. Then when I put them all in, I realized they weren't even 90 degrees apart. No matter, you can't tell unless you look top down. However, the biggest problem was the fins weren't the right length for the boat tail. The aft tab that is supposed to touch the end of the boat tail had 1/4 inch of clearance. I didn't realize they were supposed to touch because there was so much space. Everything else about the kit is stellar, and it looks really good.

S
Scott Nokes
Awesome

The kit is a very quality kit and nice components as with any other LOC kit.
Jay at LOC is so so wonderful. I've needed advice in places and he's been there everytime and very helpful. I only build LOC kits and will continue too. Thank you for being a wonderful company. Thanks for all you have done and do

R
Richard Drown
Poor slotting on boat tail

I am painting my V2 now and wanted to add my $.02 worth. As I was installing the TTW fins in the boat tail, I realized that the slots were WAY off in spacing. The four fins are supposed to be 90 degrees apart. The slots on this kit were cut at 84, 90, 93, and 94 degrees. I had to recut one slot by another ⅜ inch to the side to get it close. The other one was ¼ inch. I already had one fin epoxied in when I discovered the error or I would have returned the boat tail for a different one. I guess that is why you should dry fit and check for square before beginning.
The rest of the kit is high quality and will still recommend LOC to everyone as a good kit.

J
John Hagen-Brenner
LOC 4 Inch V-2. Marginal kit, semi scale.

The first thing I noticed is that the root edge of the LASER cut fins do not come close to mating with the boat tail contour, with gaps up to 3/32" in places. The root edge profile is cut in straight lines. I'll have to transfer the boat tail curve to the fins and trim them, which means the fin tab, where it mates to the MMT will probably have to be adjusted. I guess that's what makes it an advanced kit. I've got the skills, but didn't anticipate the extra noodling. The instructions are very brief and sparse and describe installing launch lugs instead of the supplied rail buttons, for which there are no instructions and I have no experience with. True scale is marginal, but true scale is not claimed. To get the length proportional to the BT diameter, the main airframe BT would be shortened by about 2.65 inches. I bought a different nose cone that's got a better point on it as the one supplied looked too blunt for my liking. I think it'll be a nice rocket when I get it finished.

M
Mark Payne
LOC V-2 s

Wonderful kits. Need help making it truly scale. Motor options ?