Celebrating 35 years of LOC – we bring back an old favorite! The LaserLOC series was one of the first production minimum diameter kits available to the public. Keeping the tradition going we have a few modern day tweaks that will put your skills to the test. A gentle laser etch around the slots allow for easier glassine removal. Multi-slot airframe allow the fins to click into the booster. Precut 4oz fiberglass cloth can be easily epoxied from fin-airframe-fin. This reinforcement will give your LaserLOC the strength for today’s higher impulse motors. Fiberglass should be applied with a long cure epoxy for best results. If you have never glassed anything before, here’s your chance! The booster is a zipperless design. 1/4″ Launch lugs included. Fly away rail guides are another alternative.
Strong enough for supersonic flights. Light enough on your wallet and to fly an E motor!!!
Using a high build primer apply 2-3 coats. sand with 400 until spirals are filled. Paint as desired or follow below.
Createx Paint. Follow manufacturers recommendations for applications.
To achieve OEM color(s) the following paint was used and their respective ratios.
6002 Sealer Black
4258 Gloss Black
4004 Quick Silver. 1 lite coat, 2 moderate coats (do not over coat!)
4030/4661 Balancing Clear and Candy Emerald (until desired density)
Lightly sand with 1000 grit to knock down any over spray before applying decals. Clear as desired after decal application.